Download Category: CHEMICAL ENGINEERING PROJECT TOPICS

ABSTRACT The aim of this research project was to determine the effect of particle size on the extraction of oil from groundnut. The successful extraction of the project require the following steps i.            Collection of the seeds ii.          Preparation of the seeds ...

ABSTRACT The seminar topic, “Extraction of oil from local seeds” is based on the study of palm oil and groundnut oil from palm fruits and groundnut seeds respectively, which are the local seeds. Oil is an organic substance which is ...

ABSTRACT The major aim of this project research work is to produce emulsion paint from locally sourced pigment & extenders. The materials used for the production was of local source. The major raw materials used for the production of the ...

ABSTRACT This report aimed at determining the presence and removal of mercaptan sulphur in kerosene using colour indicator method. It is known that impurities such as free sulphur, sulphur dioxide, mercapters, funing materials etc. are found in petroleum products. Consequently,absorbents ...

ABSTRACT The project aims to develop a flow process to obtain the optimum temperature and time necessary for the maximum recovery of alkali present in palm inflorescence. On this ground, a preliminary experiment was performed. During this process, both male ...

ABSTRACT This project work is on the bleaching of palm oil using activated charcoal. The charcoal used for this work was made from pieces of animal bone by carbonization method. It was then activated into two different samples. Firstly, the ...

Abstract Pollutant emissions in Enugu urban are generally from the combustion of petroleum products and to a negligible extent, solid waste disposal by open burning. The quantity of petroleum products consumed within Enugu urban was obtained in the spot” from ...

CHAPTER ONE 1.0  INTRODUCTION 1.1 HISTORICAL BACKGROUND OF THE STUDY The earlist information about usage of grasses as a writing material dates back to 3000 be in Egypt where the pressed pith tissue of papyrus sedge Cyperus Papyrus L. was the ...

CHAPTER ONE INTRODUCTION 1.1     BACKGROUND HISTORY Panel painting, painting executed on a rigid support—ordinarily wood or metal—as distinct from painting done oncanvas. Before canvas came into general use at the end of the 16th century, the panel was the support most often used for easel painting. A variety of woods have ...

ABSTRACT This study was aimed at the preservation of palm wine using ultraviolet radiation. The experiments were done using an ultraviolet sterilizer at time intervals of 2, 4,7,25 and 29hours. The freshly tapped palm wine was first analyzed and result ...

CHAPTER ONE 1.0    INTRODUCTION 1.1    BACKGROUND In the design of pipeline filled with flowing fluid, it is imperative that the vibration properties of the pipeline are analyzed to prevent excessive vibration of the pipelines as this could cause damages to ...

ABSTRACT This work deals with the multi-faceted impact of gas flaring on a global scale and the different approach employed by researchers to measuring gas flared and its resulting emissions and the effect on environment, life and so on. It ...

ABSTRACT Studies were conducted to determine the phytochemicasl present in moringa olrifera and Azadrichta indica leaves. Leaves for this work were washed, room dried ground to powder. The ground leave for both sample were soaked in four different solvent; Ethanol, ...

ABSTRACT This project work studied the refining of crude soya bean oil extracted from soya bean seed using alkali /caustic refining method. The work was carried out using phosphoric acid for the degumming /pretreatment process and sodium hydroxide for the ...

ABSTRACT This study is a comparative analysis of the use of coal, fuel oil and natural gas for cement production noting their physical and chemical properties, cost and availability, impact on the environment and human health. Out of the seven ...

ABSTRACT A laboratory scale fluidized bed reactor was designed and fabricated successfully. The reactor consists of three sections: (a) bed section, (b) freeboard section and (c) conical closure section with inlet cone. The design parameters which affect the performances are ...

ABSTRACT Coal combustion is responsible for the majority of electricity production in the United States. It is however, also the primary cause for carbon dioxide emissions, which contribute to global warming. With oil reaching its peak production in the near ...

ABSTRACT This project is a fabrication of a standard drawing writing desk using the cheapest, effective and most readily available materials. Method of maintenance and services were also taken into consideration. The functional aspect of the equipment was also given ...

ABSTRACT A book shelve is a structure which here series of compartments for the preservation of books, valuable or useful materials, which are made up of metal, wood or plastic materials of construction. (Engineering materials). The book shelve was constructed ...

ABSTRACT The project title “fabrication of flow nozzle” was done by a selected group of ND II Chemical Engineering Students and the practiced objective (aim) of the project was centered on constructing a nozzle that is capable of transporting fluid ...